Productivity is the most important determinant of the standard of living of a group of people, a nation or a planet. Productivity in its simplest form is output per hour worked, and its recent slower growth rate is distressing. This article summarizes why productivity is crucial to our standard of living. The next article explains its determinants and forecast. Show The great gains in standard of living have come from higher output per hour. That was true of the United States and Europe during the industrial revolution, and it's true of Asia in recent years . Gain could, theoretically, have come from a change in distribution: more income going to workers, and less to owners of capital. Despite recent talk about inequality, changes in income distribution have not driven rising living standards over long periods of time. Rising incomes result from rising productivity. Note that when “productivity” is used alone, it usually refers to labor productivity, but the concept can be applied to other factors of production. We sometimes refer to energy productivity (output per unit of energy used), and factory managers look at the ratio of output produced to raw materials used. In this article we focus on labor productivity. Labor productivity is not well measured. In manufacturing, it’s easy to compare the dollar value of goods produced to the person-hours of labor required to produce those goods. It’s much harder in services. Take banking, for example. Your checking account is clear as mud. The bank provides to you the service of processing checks, for which you don’t pay (aside from exorbitant fees for bounced checks and stop-payments). However, the bank does not pay you a market rate of interest on the money you keep in the your checking account. It’s a trade: free services in exchange for free account balances. Government statisticians estimate the dollar value of the trade, so that the productivity of bankers can be assessed, but the figures are not very precise. Health care is another area where data don’t allow very accurate estimates on productivity. So productivity statistics provide a general tone, not high-fidelity notes. Productivity is also pro-cyclical: it rises in booms and falls in recessions. Companies do not cut back employment in downturns as much as production drops. Businesses probably want to retain their best workers, even if they are not fully utilizing those people’s talents. As a result, looking at quarter to quarter changes in productivity is misleading. Any strong quarter for gross domestic product will have strong labor productivity. The best way to look at productivity is over longer time periods. The chart shows how volatile the data are. Interpretation is not easy at all. Determining the standard of living of a society begins with labor productivity, but it also includes how many workers there are relative to the entire population. For the world, about 52 percent of all people are working age (16 through 64). Japan, has only 37 percent of its population of working age, but South Korea has 63 percent. There’s not too much to be done about the age distribution of population aside from encouraging working-age immigrants. However, it takes a lot of immigrants to outweigh a country’s own population trends, and some countries are not interested in integrating immigrants into their society. When productivity rises, worker compensation tends to rise in pace. This isn’t true of every specific year, but it’s generally true over long time periods. With higher productivity and the same old wage rate, companies try to hire more workers. The increased demand for labor bids up the wage rate, and the gains from higher productivity flow through to the workers. This does not at all depend on the generosity of companies; it’s simply how competitive markets work. Next up: Productivity Forecast
We are already familiar with the idea of an aggregate production function—it is the concept behind the production possibilities frontier. Remember, the PPF shows the maximum quantities of goods and services a nation can produce given the resources it has available. The aggregate production function determines those maximum quantities. Economic growth is illustrated by an increase in the production possibilities frontier, which we show in Figure 2, below. The inner PPF corresponds to the maximum GDP obtainable given the resources available in 2010. The outer PPF shows the maximum GDP obtainable given the resources available in 2010. Economic growth is illustrated by the outward shift in the PPF. What causes economic growth then? It must be increases in physical or human capital, or technological improvements.
We indicated that economists often use real GDP per capita as a proxy for the standard of living. We can examine how the standard of living improves over time by looking at the aggregate per capita production function, shown below in Figure 3. The aggregate per capita production function is very similar to the aggregate production function, except that all elements are divided by the population. The inputs are the average level of human capital per person, the average level of physical capital per person, and the level of technology per person. Increases in the quantities of physical capital, human capital and technology per person lead to a higher standard of living over time.
In economics, productivity refers to how much output can be produced with a given set of inputs. Productivity increases when more output is produced with the same amount of inputs or when the same amount of output is produced with less inputs. There are two widely used productivity concepts.
This Explainer outlines how productivity is measured, what drives productivity growth and how productivity growth contributes to the economic prosperity and welfare of all Australians.
How is productivity measured?In Australia, the Australian Bureau of Statistics (ABS) produces measures of output and inputs for different industries, sectors and the economy as a whole. Productivity is not measured directly but is calculated by dividing a measure of output by a measure of inputs. OutputOutput refers to a quantity of goods and services produced in a given time period. Output for an industry or sector is usually measured by gross value added (GVA), which is the total value of goods and services produced less those goods and services used in the production process (known as intermediate consumption). Output for the whole economy can be calculated by summing GVA across industries. Alternatively, adding the value of taxes to GVA and subtracting the value of subsidies on products gives gross domestic product (GDP) (see Explainer: Economic Growth). InputsLabour and capital are the two main types of inputs.
Labour productivity is defined as output produced per unit of labour input. Labour productivity = Output Labour input Suppose a person is employed for 40 hours a week in a toy factory. In a given week, the worker produces 120 dolls. The productivity of the worker in that week is 3 dolls per hour. Labour productivity = Output Hours worked = 120 dolls 40 hours = 3 dolls per hour Suppose the factory produces a range of toys, including dolls, miniature cars, card games and board games. In a given week, the gross value added of these goods is $5 million, using 125,000 hours of labour. Labour productivity for the toy factory in that week is $40 per hour. Labour productivity = Output Hours worked = $5 million 125,000 hours = $40 dolls per hour
Most businesses produce output using a combination of labour and capital inputs. MFP is calculated as a measure of output divided by a measure of combined inputs. Both the denominator and numerator are usually represented by indexes, which is a useful way of comparing changes in economic time series relative to a base period. The value of the index in the base period is usually set to equal 100. MFP index = Output index Combined input index x 100 Because of the use of indexes, MFP is usually analysed in terms of growth rates rather than levels. Suppose that a factory uses a combination of labour and capital to produce dolls, board games and other toys. Suppose that year 1 is the base year when an output index and a combined input index for the toy factory are both set equal to 100. In year 2, the output index increases to 107 while the combined input index increases to 105. The MFP index for the toy factory in year 1 is 100 and the MFP index in year 2 is 101.9.
The growth in MFP between year 1 and year 2 is 1.9 per cent. MFP Growth = MFP Year 2 - MFP Year 1 MFP Year 1 x 100 = ( 101.9 - 100 100 ) x 100
MFP uses a measure of combined labour and capital inputs, where each input receives a weight reflecting its costs to Australian businesses. Measurement difficultiesThere are a number of challenges associated with measuring productivity. For example:
What drives productivity growth?In economics, the production possibility frontier (PPF) is used to show all possible combinations of goods and services that can be produced with a given amount of inputs and technology, when all inputs are used to their full capacity. The PPF can apply to any number of goods and services produced in the economy. However, it is usually illustrated in two dimensions for two goods and services and is useful for showing two ways in which businesses can increase productivity – by operating more efficiently or by expanding productive capacity. Productivity improvements can also have spillover effects for other firms. Efficiency improvementsA business is producing on its PPF if it is not possible to produce more of one good or service without producing less of another. Economists call this ‘technical efficiency’. If production is inside the PPF, moving closer to the PPF represents an increase in productivity, as more output can be produced with the same inputs. Suppose a business produces two goods, X and Y. All possible combinations of X and Y that achieve technical efficiency for some amount of inputs and technology is given by PPF1 in the diagram below. If the business is initially producing at point A, which is inside PPF1, then it is not technically efficient. If production moves from point A to point B, which is on PPF1, the business can achieve technical efficiency and higher productivity, as more output can be produced with the same inputs. One way to improve technical efficiency is through microeconomic reform. Australia's microeconomic policies – such as those related to competition, trade, tax and market regulation – have played an important role in supporting productivity growth over the past few decades by creating incentives for businesses to operate more efficiently.
Expanding productive capacityA business can also improve its productivity by expanding its potential production, represented by an outward shift in the PPF. In the diagram above, an expansion in potential production would allow the business to move from point B on PPF1 to point C on PPF2 and produce more of both types of goods. An expansion in potential production can occur as a result of innovation and advances in technology that allow a business to produce more output with the current level of inputs. Such technological progress is often embodied in capital inputs like faster computers or more powerful machines, but can also occur through improvements in knowledge that allow more output to be produced without investing in new capital. Productivity spilloversSpillover effects between businesses can further increase the overall level of productivity in the economy. For example, the sharing of knowledge between businesses can generate positive productivity spillovers. Knowledge sharing may occur through direct channels (such as industry innovation hubs) or indirect channels (such as workers changing jobs). Benefits of productivity growthProductivity growth is important for maintaining the economic welfare and prosperity of all Australians. Productivity growth can contribute to one or a combination of the following:
|