Show
A map projection is any method used in cartography (mapmaking) to represent the two-dimensional curved surface of the earth or other body on a plane. The term " projection" here refers to any function defined on the earth's surface and with values on the plane, and not necessarily a geometric projection. Flat maps could not exist without map projections. Flat maps can be more useful than globes in many situations: they are more compact and easier to store; they readily accommodate an enormous range of scales; they are viewed easily on computer displays; they can facilitate measuring properties of the terrain being mapped; they can show larger portions of the earth's surface at once; and they are cheaper to produce and transport. These useful traits of flat maps motivate the development of map projections. Metric properties of maps
Many properties can be measured on the earth's surface independently of its geography. Some of these properties are:
Map projections can be constructed to preserve one or some of these properties, though not all of them simultaneously. Each projection preserves or compromises or approximates basic metric properties in different ways. The purpose of the map, then, determines which projection should form the base for the map. Since many purposes exist for maps, so do many projections exist upon which to construct them. Another major concern that drives the choice of a projection is the compatibility of data sets. Data sets are geographic information. As such, their collection depends on the chosen model of the earth. Different models assign slightly different coordinates to the same location, so it is important that the model be known and that chosen projection is compatible with that model. On small areas (large scale) data compatibility issues are more important since metric distortions are minimal at this level. In very large areas (small scale), on the other hand, distortion is a more important factor to consider. Construction of a map projectionThe creation of a map projection involves three steps:
Because the real earth's shape is irregular, information is lost in the first step, in which an approximating, regular model is chosen. Reducing the scale may be considered to be part of transforming geographic coordinates to plane coordinates. Most map projections, both practically and theoretically, are not "projections" in any physical sense. Rather, they depend on mathematical formulae that have no direct physical interpretation. However, in understanding the concept of a map projection it is helpful to think of a globe with a light source placed at some definite point with respect to it, projecting features of the globe onto a surface. The following discussion of developable surfaces is based on that concept. Choosing a projection surface
A surface that can be unfolded or unrolled into a flat plane or sheet without stretching, tearing or shrinking is called a ' developable surface'. The cylinder, cone and of course the plane are all developable surfaces. Unfortunately, the sphere and ellipsoid are not developable surfaces. Any projection that attempts to project a sphere (or an ellipsoid) on a flat sheet will have to distort the image (similar to the impossibility of making a flat sheet from an orange peel). One way of describing a projection is describing a projection from the earth's surface to a cylinder or cone. Together with the simple second step of unrolling the cylinder (or cone) into a plane, we have the full projection. While the first step inevitably distorts some properties of the globe, the developable surface may then be unfolded without further distortion. Orientation of the projection
Once a choice is made between projecting onto a cylinder, cone, or plane, the orientation of the shape must be chosen. The orientation is how the shape is placed with respect to the globe. The orientation of the projection surface can be normal (inline with the earth's axis), transverse (at right angles to the earth's axis) or oblique (any angle in between). These surfaces may also be either tangent or secant to the spherical or ellipsoidal globe. Tangent means the surface touches but does not slice through the globe; secant means the surface does slice through the globe. Insofar as preserving metric properties go, it is never advantageous to move the developable surface away from contact with the globe, so that practice is not discussed here. ScaleA globe is the only way to represent the earth with the same scale throughout the entire map surface and in all directions. For a flat map this is not even possible across an area of any extent. Thus, on a flat map, properties of constant scale are always limited. Possible properties are:
Choosing a model for the shape of the EarthProjection construction is also affected by how the shape of the earth is approximated. In the following discussion on projection categories, a sphere is assumed. However, the Earth is not exactly spherical but is closer in shape to an oblate ellipsoid, a shape which bulges around the equator. Selecting a model for a shape of the earth involves choosing between the advantages and disadvantages of a sphere versus an ellipsoid. Spherical models are useful for small-scale maps such as world atlases and globes, since the error at that scale is not usually noticeable or important enough to justify using the more complicated ellipsoid. The ellipsoidal model is commonly used to construct topographic maps and for other large and medium scale maps that need to accurately depict the land surface. A third model of the shape of the earth is called a geoid, which is a complex and more or less accurate representation of the global mean sea level surface that is obtained through a combination of terrestrial and satellite gravity measurements. This model is not used for mapping due to its complexity but is instead used for control purposes in the construction of geographic datums. (In geodesy, plural of "datum" is "datums," rather than "data".) A geoid is used to construct a datum by adding irregularities to the ellipsoid in order to better match the Earth's actual shape (it takes into account the large scale features in the Earth's gravity field associated with mantle convection patterns, as well as the gravity signatures of very large geomorphic features such as mountain ranges, plateaus and plains). Historically, datums have been based on ellipsoids that best represent the geoid within the region the datum is intended to map. Each ellipsoid has a distinct major and minor axis. Different controls (modifications) are added to the ellipsoid in order to construct the datum, which is specialized for a specific geographic regions (such as the North American Datum). A few modern datums, such as WGS84 (the one used in the Global Positioning System GPS), are optimized to represent the entire earth as well as possible with a single ellipsoid, at the expense of some accuracy in smaller regions. ClassificationA fundamental projection classification is based on type of projection surface onto which the globe is conceptually projected. The projections are described in terms of placing a gigantic surface in contact with the earth, followed by an implied scaling operation. These surfaces are cylindrical (e.g., Mercator), conic (e.g., Albers), and azimuthal or plane (e.g., stereographic). Many mathematical projections, however, do not neatly fit into any of these three conceptual projection methods. Hence other peer categories have been described in the literature, such as pseudoconic (meridians are arcs of circles), pseudocylindrical (meridians are straight lines), pseudoazimuthal, retroazimuthal, and polyconic. Another way to classify projections is through the properties they retain. Some of the more common categories are:
NOTE: It is impossible to construct a map projection that is both equal-area and conformal. Projections by surfaceCylindrical
The term "cylindrical projection" is used to refer to any projection in which meridians are mapped to equally spaced vertical lines and circles of latitude (parallels) are mapped to horizontal lines (or, mutatis mutandis, more generally, radial lines from a fixed point are mapped to equally spaced parallel lines and concentric circles around it are mapped to perpendicular lines). The mapping of meridians to vertical lines can be visualized by imagining a cylinder (of which the axis coincides with the Earth's axis of rotation) wrapped around the Earth and then projecting onto the cylinder, and subsequently unfolding the cylinder. Unavoidably, all cylindrical projections have an east-west stretching away from the equator by a factor equal to the secant of the latitude, compared with the scale at the equator. The various cylindrical projections can be described in terms of the north-south stretching:
In the first case (Mercator), the east-west scale always equals the north-south scale. In the second case (central cylindrical), the north-south scale exceeds the east-west scale everywhere away from the equator. Each remaining case has a pair of identical latitudes of opposite sign (or else the equator) at which the east-west scale matches the north-south-scale. Cylindrical projections map the whole Earth as a finite rectangle, except in the first two cases, where the rectangle stretches infinitely tall while retaining constant width. Pseudocylindrical
Pseudocylindrical projections represent the central meridian and each parallel as a straight line segment, but not the other meridians, except for the Collignon projection, which in its most common forms represents all meridians as straight lines from the poles to the equators as straight line segments. Each pseudocylindrical projection represents a point on the Earth along the straight line representing its parallel, at a distance which is a function of its difference in longitude from the central meridian.
The true distance between two points on the same meridian corresponds to the distance on the map between the two parallels, which is smaller than the distance between the two points on the map; the meridians drawn on the map help the user realizing the distortion and mentally compensating for it
HybridThe HEALPix projection combines an equal-area cylindrical projection in equatorial regions with the Collignon projection in polar areas. Conical
Pseudoconical
Azimuthal (projections onto a plane)
Azimuthal projections have the property that directions from a central point are preserved (and hence, great circles through the central point are represented by straight lines on the map). Usually these projections also have radial symmetry in the scales and hence in the distortions: map distances from the central point are computed by a function r(d) of the true distance d, independent of the angle; correspondingly, circles with the central point as center are mapped into circles which have as centre the central point on the map. The mapping of radial lines can be visualized by imagining a plane tangent to the Earth, with the central point as tangent point. The radial scale is r'(d) and the transverse scale r(d)/(R sin(d/R)) where R is the radius of the Earth. Some azimuthal projections are true perspective projections; that is, they can be constructed mechanically, projecting the surface of the Earth by extending lines from a points of perspective (along an infinite line through the tangent point and the tangent point's antipode) onto the plane:
Other azimuthal projections are not true perspective projections:
Projections by preservation of a metric property
ConformalConformal map projections preserve angles locally:
Equal-areaThese projections preserve area:
EquidistantThese preserve distance from some standard point or line:
Gnomonic
Great circles are displayed as straight lines: RetroazimuthalDirection to a fixed location B (the bearing at the starting location A of the shortest route) corresponds to the direction on the map from A to B:
Compromise projections
Compromise projections give up the idea of perfectly preserving metric properties, seeking instead to strike a balance between distortions, or to simply make things "look right". Most of these types of projections distort shape in the polar regions more than at the equator:
Other noteworthy projections
|