How to make a minecraft piston door

Piston doors have been around in Minecraft for a long time. Thanks to the power of red stone, players can make tons of cool piston doors designs for their secret base in Minecraft. These piston doors can be super simple or be super complicated, depending on what you prefer.

In this article, we will show you how to make a piston door in Minecraft. This is a Minecraft double piston door design. It is simple to build, compact, and suitable for most uses.

Table of Contents

• Redstone dust
• 4 sticky pistons
• 2 Redstone torches
• 4 pressure plates
• A lot of building blocks

To make a piston in Minecraft, you need 3 wood planks, 4 cobblestones, 1 iron ingot, and 1 red stone.

Open the crafting table, put 3 wood planks on the top row, put 4 cobblestones on the left and right columns. Put the iron ingot in the center slot and the red stone in the remaining slot.

The pattern should be exactly the same as the image below, then you will have a piston crafted.

How to make a sticky piston in Minecraft

You need 1 piston and 1 slimeball to make a sticky piston. You need to put the piston in the center slot and the slimeball directly above it on the crafting table.

You can refer to how to make slimeballs here if you don't know how to do it.

2. How to make a piston door in Minecraft

Here, we will show you a step-by-step guide to build a 2x2 automatic piston door in Minecraft with pressure plates. This is one of the simplest and most popular piston door designs in Minecraft. While this piston door design is nothing compared to other complicated designs, it is very compact and even a new player can make this door easily.

When you step into a pressure plate, they will trigger the pistons and cause the door to open or close thanks to the red stones underneath. Follow the steps below to learn how to make a working piston door in Minecraft.

Step 1: Dig a hole

Dig a 2x3 hole and then expand the middle part of the hole on both sides by 2 blocks. The hole should look like a fat "+" sign when looking from the top. Also, it needs to be 2 blocks deep. This is where we put our mechanism for the door.

Step 2: Put the Redstone in

Fill out the bottom part of the hole with Redstone. After that, expand each side by 1 block and then put a Redstone torch there. These 2 Redstone torches is used to power the Redstone you just put down.

Step 3: Cover the hole

Take out your building blocks (stone, wood, whatever). First, put 2 blocks on top of the 2 Redstone torches and put a Redstone on top of each of them. After that, use your building blocks to completely cover up the hole.

Step 4: Add pistons and the door

Now add 2 sticky pistons on top of each other to each side, next to the 2 high blocks with Redstones. Also, fill up the space between the 2 pistons with building blocks. That will be your door.

Step 5: Add triggers

Most of your door is basically done now, but you won't be able to open/ close it yet. You will need to add some kinds of triggers. There are multiple options in Minecraft for you to choose from such as a button, a level,... In this design, we are going to use pressure plates.

You are going to place these 4 pressure plates right in front of the door as well as behind the door. This way, when you try to walk through, the door will open/ close automatically without having to do anything.

Step 6: Disguise your door and the triggers

Now, you have built a working piston door for your base. However, there is still a little more work to do. You need to give it a little bit of retouch to hide the red stones, the piston and make it look nicer.

If you don't want other players to find your Minecraft secret base, you can add some dirt, or grass to it so it blends with your surrounding.

>>> Read more: How To Get The Fastest Horse In Minecraft Via Breeding, Mod & Command

Piston doors have been around in Minecraft for a long time. Minecraft players may make a wide range of unique piston door designs for their fortress with red stone. It’s up to you how difficult or straightforward you want these piston doors to be. Among Minecraft gamers, piston doors are a standard entry option. These doors are visually appealing, but they may also be disguised and used as hidden entrances. Additional protection against Minecraft monsters and hostile players on the server may be provided by using Minecraft Piston Door. The player’s knowledge of Redstone determines the difficulty of these doors.

A 1×2 form is the most common piston door design. To open and shut the door, the design uses sticky pistons, Redstone, two-door blocks, and a pressure plate or lever. Sticky pistons are joined to the two-door blocks, which is how this Minecraft Piston Door works. While extending, the door closes and retracting the sticky pistons, the door opens. To open the switch, all players need to use Redstone to connect the sticky pistons.

This article will go through how to build a piston door in Minecraft. This is a Minecraft design for a door with two pistons. Putting it together is quick and straightforward, and it has a wide variety of uses.

Material Required to Build Piston Door

• Redstone dust
• Redstone torches
• Sticky pistons
• A lot of building blocks
• Pressure plates

How to Make Piston in Minecraft?

To build a piston in Minecraft, you’ll need three wood planks, one iron ingot, four cobblestones, and one red stone. Using the crafting table, assemble the top row of planks with three wood tones, and the left and right columns with four cobblestones. Make sure you put the red stone in the last slot and the iron ingot in the middle.

How to Make Sticky Piston?

To make a sticky piston, one piston and one slimeball are all you need. Place the piston in the middle slot and the slimeball on the crafting table.

How to Make Piston Door in Minecraft?

This article will show you how to use pressure plates to build a 2×2 motorized piston door in Minecraft. It’s one of Minecraft’s most essential and popular Minecraft Piston Door concepts. Compared to more complex designs, this piston door’s design is basic yet compact, and even a new player may quickly assemble it.

When you walk into a pressure plate, the red stones underneath you will activate the pistons, opening or shutting the door. Learn how to build a door with a piston in Minecraft by following these instructions.

Dig a Hole

Two blocks should be added to either side of the 2×3 hole to enlarge it. The gap should look like a big “+” when seen from the top. Two blocks in depth are required. This is where the door’s mechanism will be installed.

Put the Redstone in

The bottom of the hole should be filled with red stone. A Redstone torch should be placed on either side of the expanded area. These two Redstone burners provide the energy for the Redstone you just set.

Covering the hole

Make sure you have all your tools and supplies on hand (stone, wood, whatever). Stack two blocks on each of two Redstone burners, then a Redstone on top of each, to get the burners up and running. Make sure to fill the hole with your constructing blocks.

Adding pistons and the door

Now, place two sticky pistons on each side of the two high blocks containing red stones. Fill the space between the two pistons with construction blocks as well. That’s going to be your big debut.

Adding Triggers

However, you won’t be able to open or lock your door for some time after this point. There will be a need for a variety of triggers. It is possible in Minecraft to choose from many different options such as a button, a level, etc. Pressure plates will be used in this design.

The door will have four pressure plates above and behind it. When you attempt to enter, the door will open and shut on its own, and you won’t have to do anything.

Disguise your triggers and door

You’ve just finished building a Minecraft Piston Door for your base that works. Despite this, there is still work to be done in this area. The red stones and piston will need to be hidden, and the appearance improved. It is possible to hide your base from other players by covering it with dirt, grass, etc., to make it fit in with the landscape.