What is diffusion and osmosis simple?

Osmosis and diffusion are the two different types of passive transport, which play a vital role in moving molecules in and out of the cell.

Índice Show

Difference between Osmosis and Diffusion
What is Osmosis

Osmosis

The process of moving of solvent particles across a semipermeable membrane from a dilute solution into a concentrated solution to equalize concentration. The complete process does not require energy in order to take place.

For example, the absorption of water molecules from the soil through the roots of the plant.

More to Explore: Reverse Osmosis

Diffusion

The process of moving particles from a region of higher concentration to the region of lower concentration until equilibrium is reached. Simple diffusion does not require energy in order to take place; however, facilitated diffusion requires ATP.

An example of diffusion of the perfume sprays into the air by spreading the aroma.

Read More: Diffusion

Difference between Osmosis and Diffusion

Osmosis	Diffusion
It is limited only to the liquid medium.	Occurs in liquid, gas and even solids.
Requires a semipermeable membrane.	Does not require a semipermeable membrane.
Depends on the number of solute particles dissolved in the solvent.	Depends on the presence of other particles.
Requires water for the movement of particles.	Does not require water for the movement of particles.
Only the solvent molecules can diffuse.	Both the molecules of solute and solvent can diffuse.
The flow of particles occurs only in one direction.	The flow of particles occurs in all the directions.
The entire process can either be stopped or reversed by applying additional pressure on the solution side.	This process can neither be stopped nor reversed.
Occurs only between similar types of solutions.	Occurs between the similar and dissimilar types of solutions.
It involves the movement of only solvent molecules from one side to the other.	It involves the movement of all the particles from one region to the other.
The concentration of the solvent does not become equal on both sides of the membrane.	The concentration of the diffusion substance equalizes to fill the available space.
Depends on solute potential.	Does not depend on solute potential, pressure potential, or water potential.
Only water or another solvent moves from a region of high energy or concentration to a region of lower energy or concentration.	Any type of substance moves from area of highest energy or concentration to region of lowest energy or concentration.
Not associated with uptake of minerals and nutrients.	It helps in the uptake of minerals and nutrients.

Further Reading: Cell Wall

Conclusion

To incorporate the movement of molecules in and out of the cell, two types of transport systems exist, namely osmosis and diffusion. These two systems are passive transport systems as they do not require any additional energy to function (however, facilitated diffusion requires ATP). The primary differentiating factor between the two systems is the medium in which they are employed. Osmosis can only function in a liquid medium, but diffusion can occur in all three mediums (solid, liquid and gas). Furthermore, osmosis requires a semi-permeable membrane, while diffusion does not. The intake of water in plants is an example of osmosis. Diffusion is observed when a drop of food colouring is added to a glass of water, where eventually, the entire water content becomes coloured.

Extended Reading: Passive Transport

To know more about Osmosis and Diffusion, or other related topics, please register with BYJU’S.

Put your understanding of this concept to test by answering a few MCQs. Click ‘Start Quiz’ to begin!

Select the correct answer and click on the “Finish” button
Check your score and answers at the end of the quiz

Visit BYJU’S for all Biology related queries and study materials

0 out of 0 arewrong

0 out of 0 are correct

0 out of 0 are Unattempted

View Quiz Answers and Analysis

Ven diagram of osmosis vs diffusion.

Diffusion and osmosis are both passive transport processes, meaning they require no energy input to move substances. Both processes are essential to the proper functioning of biological processes such as the transport of water or nutrients between cells.

The main difference between the two is that diffusion can occur in any mixture, even when two solutions aren’t separated by a semipermeable membrane, whereas osmosis exclusively occurs across a semipermeable membrane.

There are actually three types of passive transport processes. Besides diffusion and osmosis, there’s also facilitated diffusion. While diffusion and osmosis do not involve proteins when transporting substances, facilitated diffusion needs the assistance of proteins.

Animation of a volume of solution which is initially nonuniform. Red is a high concentration of solvent while blue is the pure solute. Over time, diffusion causes the solution to even up in concentration. Credit: Comsol.

Diffusion is the passive movement of molecules from an area of high concentration of the molecules to an area with a lower concentration. Inside cells, diffusion is the transport of small molecules across the cell membrane.

Molecules are always in motion. Temperature, a physical quality people commonly reference in their daily lives, is directly related to molecular motion. It is a measure of the average kinetic energy of the molecules in a material. The energy of the molecules causes random motion which in turn triggers diffusion. Collisions between molecules are common: even in the air at atmospheric pressure, a molecule collides with a neighbor every few nanoseconds.

Across the planet, the air inside the atmosphere has the same composition and is comprised of nitrogen (78%), oxygen (about 21%), argon (almost 1%), and other gases like CO2 that are present in minute quantities (but still enough to warm the planet at an accelerating rate).

Diffusion makes air composition uniform by redistributing chemical species, such as oxygen in the air, until equilibrium is reached: in other words, until the concentration gradient — the difference in concentration between two areas — has been eliminated. If the concentration of a species is not initially uniform, over time diffusion will cause a mass transfer in favor of a more uniform concentration.

Yellow food coloring diffusing through water. The glass on the left contains hot water while the glass on the right is filled with colder water. Even though the food coloring was added to the hot water slightly after the cold water, it still diffused more thoroughly in this glass. This effect is due to the higher kinetic energy of the hot water. (Animation is 2x real-time). Credit: Austin Community College.

Once in equilibrium, the movement of molecules does not stop because their kinetic energy is the same. There is now an equal movement of chemical species in both directions.

The factors affecting diffusion are:

concentration gradient;
temperature;
distance particles must travel.

Let’s look at some examples of diffusion in action. Spraying perfume in a room will make it smell nice for a little while, but over time diffusion will distribute the odor molecules until their concentration is imperceptible to the human nose. Dropping food coloring in a cup of water, which will change the color of the whole solvent (water), is another great example of diffusion

Diffusion is a widespread and important process for both nonliving and living systems. To enter and exit a cell, substances like water or nutrients have to pass through the semipermeable membrane. Diffusion is one of the processes that enable this. A semipermeable or selectively permeable membrane is a membrane that allows some substances to pass through easily while other substances travel through very slowly or not at all.

Since diffusion occurs under a variety of conditions, scientists classify several types of diffusion.

Simple diffusion is the most common kind of diffusion, where substances are transported without the help of proteins.
Facilitated diffusion requires transport proteins to diffuse substances across a cell’s membrane.
Dialysis is the diffusion of solutes across a selectively permeable membrane.
Osmosis is usually defined as the diffusion of water, the solvent of choice in all living systems, across a selectively permeable membrane.

What is Osmosis

Osmosis, a type of diffusion, represents the movement of water across a partially-permeable membrane, from an area of high water concentration to an area of low water concentration.

Osmosis takes place in all cells. For instance, when placed in water, red blood cells will let the water creep through their membrane. When placed in a concentrated solution of sugar, the red blood cell actually shrinks because the water moves out by osmosis towards the area of lower water concentration. This is why the cells appear wrinkled when viewed through a microscope. Luckily, this never happens inside the body because the kidneys make sure the concentration of the blood stays about the same as the concentration of the solution inside the red blood cell.

Unlike red blood cells, plant cells have a far stronger and more rigid cell wall on the outside of the cell membrane. This enables the plant cells to absorb more water by osmosis without bursting. Without osmosis, plants wouldn’t be able to absorb water from the soil. As more water is absorbed, the cell themselves become rigid due to the pressure — this is very useful since plants don’t have skeletons. If plant cells lose too much water by osmosis, they become less rigid, and eventually, the cell membrane shrinks away from the cell wall.

Credit: Wikimedia Commons.

When osmosis is used to equalize concentrations on both sides of the membrane, it exerts a force called osmotic pressure. For instance, picture two compartments in a tank separated by a semipermeable membrane that only allows water molecules to pass through. One compartment is filled with a salt solution, while the other adjacent compartment is a pure water solution. The only way equilibrium can be reached is by transporting water from the pure water compartment to the saltwater compartment. In doing so, osmosis raises the level of liquid in the saltwater compartment until enough pressure caused by the difference in levels between the two compartments stops the processes. The pressure it takes to reach this equilibrium is called the osmotic pressure.

There’s also such a thing as reverse osmosis, which is literally the reverse process of osmosis, where the solvent filters out of the high concentrate into the lower concentrate solution. In other words, instead of seeking an equal balance of solvent and solute in both solutions, reverse osmosis separates the solute from the solvent.

Reverse osmosis is very handy for applications like water desalination (removing salt from seawater). Worldwide, there are now over 13,000 desalination plants in the world. In reverse osmosis, we are (literally) just reversing the process by making our solvent filter out of our high concentrate and into the lower concentrate solution, so instead of creating an equal balance of solvent and solute in both solutions, it is separating out solute from the solvent.