Today i am teach you How to Root Samsung SM-G975F Android11 & Samsung S10+ RootFile Download without risk.This method working for samsung all serise its esay and simple method.Why you need samsung phone root.many phone come other country so if you country and network unlock you phone and some time imei reapir and fix it imei and reapir network you need root accces. How to Root Samsung SM-G975F Android11 & Samsung S10+ RootFile Download Firmware.After root your phone you can fix network unlock,root samsung S10+ ,imei Repair,network repair,install primium app and fix many more softwer related problem. Show  How to Root Samsung SM-G975F Android11 & Samsung S10+ RootFile Download Firmware On this post you will find without risk on dead.so its esay method like Eft root.Download Samsung S10+ root for SM-G975F Root Firmware.i am teach you step by step How to Root Samsung SM-G975F Android11 & Samsung S10+ RootFile Download Firmware. How to Root Samsung SM-G975F Android11 & Samsung S10+ RootFile Download.? 1# Download Eft Root Tool. 2# Download S10+ SM-G975F Root Firmware. a:G975FXXU9ETLJ: Here b:G975FXXU9EUA4: Here c:G975FXXS9EUB1: Here d:G975FXXU9FUBD: Here e:G975FXXS9EUB2: Here 3# Turn on OEM in Developer settings 4# If OEM still "on" in Download mode then unlock the bootloader from download mode. 5# Connect your device to WiFi and wait until you see "OEM unlocking" in developer settings. 6# After you see (OEM: OFF / FRP: OFF / RMM - KG: Checking or passed or disappeared); Flash the file. 7# Now Your Samsung S10+ SM-G975F Android 11 Root Task Complite. Note: 1# If the device stuck on bootloop then boot to recovery mode by hold pressing Power and Volume up until you see the recovery mode then do a factory reset then reboot to system. 2# After first boot to the system Connect your device to WiFi and wait until you see the "OEM unlocking"in developer settings. 3# If your device is not rooted then Enable "USB Debugging" in developer settings then press on"Reboot ADB Device to Root Mode (Recovery Mode)" And now you know about How to Root Samsung SM-G975F Android11 & Samsung S10+ RootFile Download Firmware.If you think i was able to help you in anyway, or if you enjoyed my post, i would love to hear from you. Any kind of suggestions or advice is always welcomed. Leave a comment below i will definetaly reply. Hi friends this tutorial will explain in detail on how to root Samsung Galaxy S10, S10+ Or S10e using the Magisk app. When it comes to rooting the Android 9 Pie, Android 10, Android 11 & Android 12 and above devices it’s not that easy like before. The whole rooting process in these devices are a little tricky and you need to follow the exact same procedure rather than the old easy method of using chain fire autoroot, SuperSU and the mighty Odin application or any ready made app. In this method we are using the Magisk app. There is a small relief though because this process doesn’t involve TWRP.
Rooting Galaxy S10 with Magisk an IntroductionEven after rooting using this method, there is still an option to use the stock recovery or the custom recovery using some key combinations. Isn’t it amazing! As these steps involves factory resetting please make sure that you have made a complete backup of your phone memory first before proceeding with the root steps.
Before proceeding with the below steps please ensure that you have downloaded and installed the Samsung USB drivers from the below link;
Steps To Root Galaxy S10, S10+ Or S10e Using Magisk App1. First you need to perform the OEM unlock. For that first you need to enable “Developer Options” on your Galaxy Smartphone. For that first goto Settings>About phone Now tap on “Software Information” here. Now when in the above page tap on “Build number” 10 times or until you get the popup “You are now a developer” to enable the “Developer options“. Next go back to the previous menu now and you will be able to see the “Developer options” at the bottom of the previous page. Please make sure that you are connected to the internet all these times. Here tap on “OEM unlocking” and you will get the below warning. Now tap on “Turn on” to activate the “OEM unlocking“. To enable “USB debugging” tap on the corresponding menu entry and you will get the below warning. Now same way tap on “Turn on” to activate the “USB debugging“. When everything is enabled you will get the page as shown below. Further, unlike previous devices there is an additional security feature in the new Android firmwares which is called “vaultkeeper“ that will messup the unlocked bootloader. So you need to perform some additional steps to keep the unlocked bootloader intact. For that; Please switch off your Galaxy S10 now and wait for the device to completely switch off. Now while pressing and holding the “Bixby” and “Vol Down” buttons together connect your S10 device to your PC using the USB data cable. When you get the warning screen like given below release the buttons and press and hold the “Vol Up” button to unlock the bootloader on your Samsung Galaxy S10, S10+ or S10e. Once done your Galaxy S10/S10e/S10 Plus will be automatically factory resetted and rebooted. When it is completely booted up you need to enable the “OEM Unlocking” again by going back to step 1. Now make sure that “OEM Unlocking” in the “Developer Options” is “ON” and greyed out. If so you are good to proceed. Downloading firmware files to root Galaxy S102. In this step you need to download the firmware corresponding to your device.
You may need to login/create a free account to download the files. Also make sure that your phones bootloader is not locked by any carrier if so, please unlock it first. Please use the above screenshot as reference for finding the above mentioned file. Now copy the file which starts with “AP” and ends with “.tar” extension to your phone’s storage. In the next step download and install the Magisk Manager Application from this link and install it. Download the latest version. Please don’t forget to navigate to your phone settings menu, and to the security settings. Enable the Install from Unknown Sources option. Installing MagiskNow once installed open “Magisk Manager” app and tap on the ‘Install’ button where it says “Magisk is not installed“. In the next popup frame or when you click the “Install” button again you will get an option to select the patch file. Here select the “APxxxxxxxxxx.tar file that was copied earlier to you phone. Magisk Manager application will now patch the file and output the patched system firmware (AP) file to the path ‘[Internal Storage]/Download/’ Now copy the patched file ‘magisk_patched.tar’ from ‘[Internal Storage]/Download/’ to your PC desktop. Before proceeding to the next step please ensure that you have downloaded and unzipped the Odin v3.13.1 to your PC from this link. Once extracted run the odin_xxxx.exe file. Now disconnect your phone from PC and enter it into the “Download Mode“. To enter into the download mode switch of your phone first, once it’s completely in the power down status press and hold the “Vol Down” and “Bixby” buttons, while holding all the buttons connect your phone to your PC. Now you will get a warning message on your phone screen. Once you get that press “Vol Up” button to enter into the “Download Mode” on your Samsung Galaxy S10, S10+ or S10e. Adding files in OdinNow lets get back to the already opened “Odin” application. There you will get the above window on your PC. Now click the “AP” button from Odin and select the “magisk_patched.tar” file you have just copied from your Galaxy S10, S10e or S10 Plus. Please don’t forget to uncheck “Auto Reboot” from “Odin” “Options“. Once done please click on the “Start” button in the Odin window and wait for the process to complete. When the process finishes exit the “Download Mode” and enter into the “Recovery Mode“. For that first press ‘Power’ and ‘Vol Down’ buttons to exit download mode. Now as soon as the phone display turns off, press and hold the ‘Power’ + ‘Bixby’ + ‘Vol Up’ buttons at the same time. When you see your phone’s model on the screen just release all the buttons except the “Vol Up” buttons to enter into the stock recovery. Now in the recovery mode use the Vol Up and Vol down buttons to toggle through the options. Now highlight the ‘Wipe data/factory reset’ option and press the “Power” button to confirm the action. Once the factory data reset is completed select the ‘Reboot system now’ option from the same recovery mode menu and immediately press and hold the “Power+Bixby+Vol Up” buttons until the Bootloader Warning screen appears on your S10 screen. Immediately release all the buttons now to boot your Galaxy S10, S10+ or S10e into the rooted system. There is one more step left, once your phone is booted up, open the “Magisk Manager” app and it will perform all the remaining necessary actions. Once done, your Galaxy S10, S10+ or S10e will reboot automatically and it will be rooted with Magisk!…Hurray! Please note that unlike the previous firmware this root will be lost if you switch ON your phone normally so please keep the below things in mind while you switch OFF and switch ON your S10. Boot OptionsTo boot into unrooted system (Galaxy S10, S10e or S10 Plus): Just switch of your phone and press the power but as we normally do to switch it on. Normal queries for this tutorial
If “How to Root Samsung Galaxy S10, S10+ Or S10e Using Magisk?” tutorial really helped you, please give a like/share on social networking websites by using the below given buttons or make comment if you have faced any issue. |
How to root sm-g975f
Postagens relacionadas
direito autoral © 2024 mesadeestudo Inc.
